Purge-type Glove Box

This glove box is designed to replace the gas inside while it is being purged, whereas the side box is designed to be replace the gas inside after it has been evacuated. While being purged, the glove box is hermetically filled with a predetermined inert gas (N₂, Ar, He, dry air or the like). Specimens are loaded/unloaded through the side box, and can then be manipulated from the gloves. When a gas recycling purification system is attached to the glove box, the glove box inside can be maintained to a highly pure inert gas atmosphere for a long period of time.

Features

  • To rapidly purge and replace the gas in the glove box, the glove box incorporates gas replacement (recycling) circuit.
  • The viewing window is large, enabling large specimens to be loaded/unloaded through it.
  • Located on the side of the glove box, the side box has a sliding door for effectively accessing the glove box.
  • The side box has a slide table that facilitates specimen loading/unloading.
  • The pressure inside the glove box can be kept constant by an automatic pressure controller (optional).
  • The use of the gloves made of high-quality butyl reduces the permeation of moisture and oxygen.

Specifications

Vacuum degree of the side box6.65Pa or less
Inside finishBuffed (standard), Electropolished
Glove box internal electrical outlet100 VAC 15A × 2
Illumination LED lamp13 W
GlovesButyl (standard), Fluororubber, Neoprene
* Precision cleaning of gloves (optional)
Automatic pressure controllerEquipped with a foot switch (optional)
Viewing window safety coverPolycarbonate (optional)

Lineup

ModelGlove box Size (mm)Side box Size (mm)
LengthWidthHeightLengthWidthHeight
DBO-1B1150700700510225320
DBO-1.5B1400700700510225320
DBO-2B1150900700510300320
DBO-2BL1800700700510225320

*Glove boxes can be manufactured to sizes other than above.